Site map

OEM fiber-coupled laser modules

ATC-Semiconductor Devices presents OEM laser modules. The basic applications are pumping of solid-state lasers, medicine, material processing.

The module is a complete device, which sums radiation of a few high power laser diodes, giving up to 4W, 6W or 8W of continuous mode radiation in the 808 or 980 nm wavelength region.

The module is a complete device, which sums radiation of a few high power laser diodes, giving up to 1W, 2W, 3W or 5W of continuous mode radiation in the 665 nm wavelength region

The temperature of laser diodes is stabilized by built-in Peltier thermoelectric coolers (TEC). Laser radiation is delivered through 200, 400 or 600 micron fiber with NA=0.22, which is connected via SMA-905 connector to the main case of the module. The pilot beam of 650 nm is mixed up into the fiber as an option.

For operation of the OEM module, external power supply is required, for the laser diodes and for Peltier TEC. It might be parallel or series feed. The laser diode driver and temperature controller model LDD-10M is necessary for working with fiber-coupled laser modules. External heat distribution radiator is recommended.



Fiber coupled laser diodes and modules
Fiber coupled laser diodes
OEM fiber coupled laser modules
Model coding

Laser diodes and arrays
Laser diode cooling heads
Additional focusing optics
Laser diode driver
Diode pumped solid state lasers
Atcus series laser medical devices
Latus series laser medical devices
Laser medical device model Latus PDT
Stand for the laser diodes degradation testing
Laser systems for scientific and educational application
Приборы для ПЦР-анализа
Лазерные модули продукции фирмы ЛИМО



The main technical parameters:

Output optical power in CW mode, W 1 2 3 4 6 8
Emission wavelength, nm 665 ± 5 808 ± 5
970 ± 10
Fiber core diameter, microns 200 400 / 600 200 400 600 / 200
Numeric aperture 0.22
Case Operating Temperature range, 0C +150C - +300C
Storage Temperature, 0C -200C - +600C
Spectral Width (FWHM), nm < 4
Typical operating current, A 1.3 2.5-3.5 2.5 3.8 4.6 - 5.1
Operating voltage, V < 7.0
Thermistor 10 kOhm 250C
Max Peltier voltage, V 12.5
Max Peltier current, A 6
Fiber Length, m 1 - 1.5
650 nm pilot beam No Available
Dimensions (without pins), mm 90x60x31
Weight, g 500


© Company "ATC - Semiconductor devices", Saint - Petersburg, 2003,   Russian version
© Design & programming = Fort Inform, 2002
Rambler's Top100